Securing Enterprise Infrastructure

Security+ SY0-701 · Security Architecture

By Abu Anns · Last updated 20 November 2026Exam version: SY0-701

Designing a secure network

Objective 3.2 is scenario-based: the exam describes a network requirement and asks which design or control best meets it. The underlying principles are consistent — defense in depth, least privilege, and segmentation — and the scenarios test whether you can apply them to concrete infrastructure choices. Think of the network as a series of layers, each with its own controls, so that no single failure exposes everything.

Network segmentation and zones

Segmentation divides a network into separate zones with controlled traffic between them. A VLAN (virtual local area network) logically separates traffic on the same physical switches, so the finance VLAN cannot see the guest VLAN. A DMZ (demilitarized zone) is a buffer network between the internet and the internal network, hosting public-facing servers such as web servers and mail servers; if a DMZ server is compromised, the attacker is still outside the internal network. An air gap is complete physical separation with no network connection at all, used for the most sensitive systems. Jump servers (bastion hosts) are hardened systems that provide the only administrative access path into a protected zone: administrators log in to the jump server first, and from there reach internal systems. Microsegmentation takes the idea further by isolating individual workloads, often in software-defined networks, so that even systems in the same VLAN cannot talk to each other unless a policy allows it.

Firewalls, proxies, and load balancers

A firewall filters traffic based on rules. A stateful firewall tracks the state of connections and allows return traffic for sessions that were initiated from inside. A next-generation firewall (NGFW) adds application awareness, intrusion prevention, and user identity to its decisions. A web application firewall (WAF) sits in front of web servers and inspects HTTP traffic for attacks such as SQL injection and XSS. Firewall rules should follow an implicit deny: block everything, then allow only what is needed.

A proxy server sits between users and the internet, forwarding requests on their behalf; a forward proxy handles outbound traffic and can filter content, while a reverse proxy sits in front of servers and hides them from direct internet access. A load balancer distributes traffic across multiple servers, improving both performance and availability — if one server fails, the others take over. Port security on switches limits which devices can connect to a port, and 802.1X is the standard for port-based network access control, requiring a device to authenticate before it can join the network.

Secure protocols and remote access

The exam expects you to know which protocol to use for each job, and which legacy protocols to avoid. For remote administration, use SSH instead of Telnet (which sends credentials in clear text). For file transfer, use SFTP or FTPS instead of FTP. For web traffic, use HTTPS (TLS) instead of HTTP. For email, use SMTPS/IMAPS/POP3S (TLS-encrypted) instead of plain SMTP/IMAP/POP3. For directory services, use LDAPS instead of LDAP. For DNS, DNSSEC adds authentication to DNS responses, preventing poisoning. For network management, use SNMPv3 (which supports authentication and encryption) instead of SNMPv1 or v2c, which use community strings sent in clear text.

A VPN (virtual private network) creates an encrypted tunnel over an untrusted network. IPSec operates at the network layer and can run in tunnel mode (encrypting the whole packet, used for site-to-site VPNs) or transport mode (encrypting only the payload, used for host-to-host communication). SSL/TLS VPNs operate at the application layer and are commonly used for remote user access through a web browser. A split tunnel lets VPN users send some traffic through the tunnel and some directly to the internet — convenient, but a security risk because internet-bound traffic bypasses corporate controls; a full tunnel sends all traffic through the VPN.

Site and infrastructure considerations

Physical infrastructure matters too. Redundancy eliminates single points of failure: redundant power supplies, network links, and internet connections. Load balancing and clustering keep services available when a component fails. Hot sites, warm sites, and cold sites are alternate locations for disaster recovery, in descending order of readiness and cost (covered in depth in the resilience guide). HVAC, fire suppression, and uninterruptible power supplies (UPS) protect the physical environment. And cable management and secure wiring closets prevent unauthorized physical access to the network itself.

When the exam gives you a scenario, match the requirement to the control: public-facing servers go in a DMZ; administrative access goes through a jump server; untrusted networks get a VPN; legacy clear-text protocols get replaced with encrypted versions; and a single point of failure gets redundancy. The correct answer is usually the one that adds a layer of defense without breaking the business requirement.

Common ports and protocols

The exam expects you to recognize the well-known ports for common services, because firewall and log scenarios refer to them constantly. Memorize this table:

PortProtocolUse
21FTPFile transfer (insecure — use SFTP/FTPS)
22SSH / SFTP / SCPSecure remote administration and file transfer
23TelnetRemote administration (insecure — use SSH)
25SMTPSending email
53DNSDomain name resolution
80HTTPWeb traffic (insecure — use HTTPS)
110POP3Retrieving email (use POP3S, port 995)
143IMAPAccessing email (use IMAPS, port 993)
389LDAPDirectory queries (use LDAPS, port 636)
443HTTPSSecure web traffic (TLS)
445SMBWindows file sharing
3389RDPRemote Desktop Protocol

When a scenario mentions traffic on an unexpected port — for example, outbound traffic on port 53 to an unknown server, or a workstation accepting connections on port 3389 — that is often the clue that something is wrong. Port 53 traffic to an unfamiliar DNS server can indicate DNS tunneling (smuggling data out inside DNS queries), and an open RDP port on a workstation can indicate a backdoor. The port number is the exam's way of telling you which service is involved without naming it.

One final infrastructure concept is high availability through clustering: two or more servers configured so that if one fails, another takes over automatically. Active-active clustering runs all nodes serving traffic at once, while active-passive keeps a standby node idle until the primary fails. Combined with load balancing and redundant network paths, clustering is how organizations meet demanding availability requirements — and the exam may ask which design keeps a service running when a single server fails.

Advertisement

Exam traps to watch for

Practice questions

Test yourself on this guide. Answers are checked instantly, with a full explanation for each question.

Q1.A company wants to host a public web server that customers can reach from the internet, but it must not allow internet traffic to reach the internal network if the web server is compromised. Where should the web server be placed?

Report an error

Q2.A system administrator needs to manage a Linux server remotely. The current method uses Telnet. Which change best secures this remote administration?

Report an error

Q3.Two branch offices need a permanent, encrypted connection between their networks so that traffic between offices is protected over the internet. Which solution should be used?

Report an error

Q4.A company wants to prevent employees from accessing known malicious websites. Which control blocks access to known malicious domains?

Report an error

Q5.An organization is concerned that an attacker could plug an unauthorized laptop into an unused Ethernet port in a meeting room and gain network access. Which control prevents this?

Report an error

Q6.A web application is under attack from SQL injection attempts. The application code cannot be changed quickly. Which control can inspect incoming HTTP requests and block injection attempts before they reach the application?

Report an error

Q7.A network engineer is writing firewall rules for a new server. Which rule order follows security best practice?

Report an error

Q8.A company wants its public website to stay available even if one of its web servers fails. Which solution distributes incoming traffic across multiple servers so the failure of one does not take the site down?

Report an error