A+ Core 1 220-1201 Mock Test
50 timed questions · 50 minutes · scored by domain, with re-study links for your weakest areas.
How it works: the timer starts as soon as this page loads. Answer each question, use the numbered dots to jump around, and flag questions to come back to. You see no feedback until you submit — just like the real exam. The pass guide is 70%: note that some vendors (including AWS) use scaled scoring and do not publish a percentage pass mark, so 70% is a study guide only.
Q1.A technician is replacing a laptop keyboard. Which step should be done FIRST?
Explanation: Before any internal laptop work, power off the device, disconnect mains power, and remove the battery (where possible) to prevent short circuits and electric shock. Option C is wrong because prying with a metal screwdriver can damage the keyboard, the case, and internal components — plastic pry tools are used instead. Option A is wrong because drivers are a software concern, irrelevant to a physical replacement. Option D is wrong because the BIOS does not need to be involved in a keyboard replacement.
Exam objective: 220-1201 Objective 1.1: Given a scenario, monitor mobile device hardware and use appropriate replacement techniques
Q2.A user's phone will not connect to the office Wi-Fi, but it connects to Wi-Fi at home. The user has confirmed the office password is correct. What should the technician check next?
Explanation: When a phone works on one Wi-Fi network but not another with a correct password, the cause is usually a stale saved network profile or an authentication method (such as WPA2-Enterprise or a captive portal) that the phone is not set up for. Forgetting and re-adding the network, or configuring the correct authentication, is the right next step. Option D is wrong because Bluetooth is unrelated to Wi-Fi. Option B is wrong because battery level does not affect Wi-Fi connectivity. Option A is wrong because an eSIM is for cellular data, not Wi-Fi.
Exam objective: 220-1201 Objective 1.3: Given a scenario, configure basic mobile device network connectivity and provide application support
Q3.A technician needs to allow secure web traffic through a firewall but block unencrypted web traffic. Which ports should be opened and closed?
Explanation: HTTPS uses TCP port 443 and HTTP uses TCP port 80, so opening 443 and closing 80 allows encrypted web traffic while blocking unencrypted traffic. Option D does the opposite. Option C is wrong because ports 25 and 110 are email ports (SMTP and POP3). Option A is wrong because ports 53 and 67 are DNS and DHCP.
Exam objective: 220-1201 Objective 2.1: Compare and contrast TCP and UDP ports, protocols, and their purposes
Q4.Which 802.11 standard first introduced the 6 GHz band for Wi-Fi?
Explanation: Wi-Fi 6E is the extension of 802.11ax that adds the 6 GHz band, offering more channels and less congestion. Option A is wrong because 802.11n uses 2.4 and 5 GHz only. Option C is wrong because 802.11ac is 5 GHz only. Option D is wrong because 802.11g is a 2.4 GHz standard from 2003.
Exam objective: 220-1201 Objective 2.2: Explain wireless networking technologies
Q5.A company wants all employee computers to synchronize their clocks with a central time source so that login authentication does not fail. Which server role provides this?
Explanation: NTP (Network Time Protocol) servers provide time synchronization across the network, which matters because authentication systems such as Kerberos reject logins when clocks drift too far apart. Option D is wrong because DNS resolves names to IP addresses. Option C is wrong because a syslog server collects log messages. Option B is wrong because a print server shares printers.
Exam objective: 220-1201 Objective 2.3: Summarize services provided by networked hosts
Q6.A technician is choosing a monitor cable for a new 4K display. The cable must carry both digital video and audio. Which is the best choice?
Explanation: HDMI and DisplayPort both carry digital video and audio over a single cable and support 4K resolution. Option A is wrong because VGA is analogue video only and cannot carry audio or 4K. Option D is wrong because DVI carries video only (no audio) and is an older standard. Option C is wrong because a 3.5 mm cable carries analogue audio only, not video.
Exam objective: 220-1201 Objective 3.2: Summarize basic cable types and their connectors, features, and purposes
Q7.A server administrator is choosing RAM for a database server where a single-bit memory error could corrupt financial records. Which type of RAM should be used?
Explanation: ECC (error-correcting code) RAM detects and corrects single-bit memory errors, which is essential for servers handling critical data such as financial records. Option C is wrong because non-ECC RAM cannot detect or correct errors. Option A is wrong because SODIMM is a laptop form factor, not a server RAM type. Option D is wrong because DDR3 is an older generation and its age does not make it more reliable than ECC.
Exam objective: 220-1201 Objective 3.3: Compare and contrast RAM characteristics
Q8.A video editor needs the fastest possible storage for editing 4K footage and has a free PCIe slot. Which storage option gives the highest throughput?
Explanation: NVMe over PCIe provides several GB/s of throughput, far above SATA's roughly 600 MB/s limit, making it the fastest option for 4K video editing. Option A is wrong because a spinning hard drive is limited to roughly 150–200 MB/s. Option B is wrong because a SATA SSD is capped by the SATA interface at about 600 MB/s. Option C is wrong because USB 2.0 is limited to 480 Mbps (about 60 MB/s) and is the slowest option listed.
Exam objective: 220-1201 Objective 3.4: Compare and contrast storage devices
Q9.A technician is installing a new CPU and needs to ensure heat transfers efficiently from the CPU to the heat sink. What should be applied between them?
Explanation: Thermal paste fills the microscopic gaps between the CPU and the heat sink, ensuring efficient heat transfer. A small, even amount is correct — too much paste insulates rather than conducts. Option D is wrong because sealant would glue the parts together and insulate rather than conduct heat. Option B is wrong because compressed air is for cleaning, not for filling the CPU-to-heatsink gap. Option A is wrong because isopropyl alcohol is a cleaning solvent that evaporates; it is used to remove old paste, not as a thermal interface.
Exam objective: 220-1201 Objective 3.5: Given a scenario, install and configure motherboards, central processing units (CPUs), and add-on cards
Q10.An office printer is shared by 20 users. The IT department wants to track who printed each document for auditing purposes. Which feature should be enabled?
Explanation: Audit logs record who printed what and when, providing the accountability trail the IT department needs. Option C is wrong because duplex is double-sided printing. Option A is wrong because tray settings control paper size and type. Option D is wrong because the ADF is a scanning feature.
Exam objective: 220-1201 Objective 3.7: Given a scenario, deploy and configure multifunction devices/printers and settings
Q11.A developer wants to test an application on Windows, macOS, and Linux using a single physical computer. Which solution allows this without buying three computers?
Explanation: A Type 2 hypervisor (such as VirtualBox or VMware Workstation) runs as an application on the host OS and lets the developer run Windows, macOS, and Linux as separate virtual machines on one computer. Option D is wrong because containers share the host kernel and cannot run a different operating system. Option B is wrong because a VPN provides network access, not local operating systems. Option C is wrong because RAID 1 mirrors storage; it has nothing to do with running multiple operating systems.
Exam objective: 220-1201 Objective 4.1: Explain virtualization concepts
Q12.A company is comparing cloud providers. One provider charges for data downloaded from the cloud but not for data uploaded to it. Which terms describe these two directions?
Explanation: Ingress is data entering the cloud (uploads) and is usually free; egress is data leaving the cloud (downloads) and is usually charged. This is a standard part of cloud metered billing. Option B reverses the terms. Option C is wrong because multitenancy and elasticity are cloud characteristics, not data directions. Option D is wrong because IaaS and SaaS are service models, not data directions.
Exam objective: 220-1201 Objective 4.2: Summarize cloud computing concepts
Q13.A desktop computer shows no signs of life at all when the power button is pressed — no lights, no fans, no sounds. What should the technician check first?
Explanation: No lights, no fans, and no sounds means no power is reaching the system at all, so the first checks are the power supply, the power cable, and the outlet (including any power strip switch). Option D is wrong because unseated RAM would still allow fans and lights to come on, with POST beeps. Option B is wrong because the OS loads long after power-on; a corrupted OS cannot cause a complete absence of power. Option A is wrong because a failed video card would still leave fans and lights working.
Exam objective: 220-1201 Objective 5.1: Given a scenario, troubleshoot motherboards, RAM, CPUs, and power
Q14.A computer that has run reliably for years has become unstable, crashing randomly. The technician opens the case and sees several capacitors on the motherboard with bulging, domed tops. What is the most likely cause?
Explanation: Bulging or leaking capacitors are a physical sign of motherboard component failure and cause exactly this kind of random instability. The motherboard needs replacement. Option B is wrong because malware does not cause capacitors to bulge. Option C is wrong because a dead CMOS battery causes clock resets, not crashes or bulging capacitors. Option D is wrong because outdated drivers cause software errors, not physical capacitor damage.
Exam objective: 220-1201 Objective 5.1: Given a scenario, troubleshoot motherboards, RAM, CPUs, and power
Q15.A user reports that their computer is very slow to start programs and files take a long time to open. Task Manager shows the disk at 100% utilization constantly. The drive is a traditional hard disk. Which upgrade would most improve performance?
Explanation: Constant 100% disk utilization on a spinning hard drive means the disk is the bottleneck; replacing it with an SSD (which is many times faster at random reads and writes) is the single most effective upgrade for this symptom. Option A is wrong because, while low RAM can cause paging, the symptom described is a disk bottleneck and an SSD addresses it directly. Option B is wrong because the CPU is not the bottleneck here — disk utilization is. Option D is wrong because the power supply has no effect on disk performance.
Exam objective: 220-1201 Objective 5.2: Given a scenario, troubleshoot drive and RAID issues
Q16.A projector in a meeting room shuts itself off after about 20 minutes of use and will not restart until it has cooled down. What is the most likely cause?
Explanation: Intermittent shutdown after a period of use, with recovery after cooling, is the classic pattern of overheating — projectors shut down to protect the lamp, and a clogged air filter or blocked vents are the usual causes. Option A is wrong because a burnt-out bulb produces no image at all, not a shutdown after 20 minutes. Option D is wrong because a wrong input source would show no image from the start. Option B is wrong because resolution affects image quality, not thermal shutdown.
Exam objective: 220-1201 Objective 5.3: Given a scenario, troubleshoot video, projector, and display issues
Q17.A user's smartphone battery drains from full to empty in two hours, the phone feels hot, and mobile data usage has spiked. There are no new apps installed. What is the most likely cause?
Explanation: Rapid battery drain combined with overheating and a spike in data usage — with no new apps — is a strong indicator of malware running hidden background processes. Option C is wrong because screen brightness affects battery life but not data usage, and would not cause a sudden two-hour drain on its own. Option D is wrong because a missing update does not cause this combination of symptoms. Option B is wrong because a damaged cable affects charging, not battery drain or data usage.
Exam objective: 220-1201 Objective 5.4: Given a scenario, troubleshoot common mobile device issues
Q18.A network administrator notices that a server's network connection is much slower than expected. The server has a gigabit NIC, but the link is negotiating at 100 Mbps. What is the most likely cause?
Explanation: A gigabit NIC falling back to 100 Mbps is usually a physical-layer problem: a damaged cable, a cable with a broken wire pair, or a faulty switch port prevents the gigabit negotiation from completing. Option A is wrong because an IP address problem would break connectivity, not reduce link speed. Option D is wrong because DNS affects name resolution, not link speed. Option B is wrong because RAM affects application performance, not the negotiated Ethernet speed.
Exam objective: 220-1201 Objective 5.5: Given a scenario, troubleshoot network issues
Q19.A laser printer produces output with vertical lines running down every page. The toner cartridge was recently replaced. What is the most likely cause?
Explanation: Consistent vertical lines on every page from a laser printer point to a physical defect in the imaging path — most commonly a scratched drum or a damaged fuser roller that marks every page in the same place. Option D is wrong because an overfilled tray causes jams, not lines. Option C is wrong because a wrong driver causes garbled output, not consistent lines. Option A is wrong because the toner cartridge was just replaced, and low toner causes fading rather than lines.
Exam objective: 220-1201 Objective 5.6: Given a scenario, troubleshoot printer issues
Q20.A user tries to print a document but the printer is not listed as available, even though it is powered on and connected to the network. Other users can print to it. What should the technician check first on the affected computer?
Explanation: When other users can print but one computer cannot see the printer, the problem is local to that computer: the printer may have been removed, the driver may be corrupted, or the computer may have lost network connectivity to the printer. Option A is wrong because low paper would affect all users and would show a printer error, not make the printer disappear. Option D is wrong because a printer that is not the default is still listed as available. Option C is wrong because toner affects print quality, not whether the printer appears in the list.
Exam objective: 220-1201 Objective 5.6: Given a scenario, troubleshoot printer issues
Q21.A user reports that the trackpad on their laptop is bulging upward and the bottom case is starting to separate. What is the most likely cause, and what should the technician do first?
Explanation: A bulging trackpad and separating case are classic signs of a swollen lithium-ion battery, which is a safety hazard: puncturing it can cause fire. The correct response is to stop using the device, avoid prying at the battery with metal tools, and arrange safe replacement and proper battery disposal. Option D is wrong because overheating RAM does not cause physical bulging. Option A is wrong because a failing drive causes data errors, not case separation. Option B is wrong because a blocked fan causes overheating, not a bulging case.
Exam objective: 220-1201 Objective 1.1: Given a scenario, monitor mobile device hardware and use appropriate replacement techniques
Q22.A company issues laptops to staff who hot-desk. Each desk has an external monitor, keyboard, and wired network connection. Which accessory lets a user connect to all of these with a single cable and charge the laptop at the same time?
Explanation: A docking station (especially a USB-C or Thunderbolt dock) connects a laptop to monitors, peripherals, and wired networking through a single cable and typically charges the laptop as well. Option A is wrong because a port replicator typically only duplicates the laptop's existing ports and does not provide charging. Option C is wrong because a basic USB hub adds USB ports only — it does not provide display output, Ethernet, or charging on its own. Option D is wrong because a KVM switch shares one keyboard, monitor, and mouse between multiple computers, which is the opposite problem.
Exam objective: 220-1201 Objective 1.2: Compare and contrast accessories and connectivity options for mobile devices
Q23.A technician is helping a user pair wireless headphones to a phone. The headphones do not appear in the phone's list of available Bluetooth devices. What should the technician check first?
Explanation: Bluetooth devices only appear in a scan when they are in discoverable (pairing) mode, so the first check is whether pairing mode is enabled on the headphones — usually by holding the power or pairing button until an LED flashes. Option B is wrong because Wi-Fi is unrelated to Bluetooth discovery. Option C is wrong because a SIM card is needed for cellular service, not for Bluetooth pairing. Option A is wrong because NFC is a separate technology; headphones do not need NFC to pair over Bluetooth.
Exam objective: 220-1201 Objective 1.3: Given a scenario, configure basic mobile device network connectivity and provide application support
Q24.A user has just replaced the SIM card in their phone with an eSIM. Which statement about eSIM is correct?
Explanation: An eSIM is an embedded SIM built into the device; the carrier profile is downloaded and activated by software, so there is no physical card to insert or swap. Option C is wrong because it describes the opposite — an eSIM has no physical card at all. Option D is wrong because an eSIM connects to the cellular network exactly like a physical SIM. Option B is wrong because OS updates do not affect the eSIM profile.
Exam objective: 220-1201 Objective 1.3: Given a scenario, configure basic mobile device network connectivity and provide application support
Q25.A user can reach websites by IP address but not by name. The firewall administrator confirms that TCP port 53 is open. What is the most likely cause?
Explanation: Reaching sites by IP but not by name points to DNS failure. DNS normally uses UDP port 53 for lookups, so opening only TCP 53 does not fix it — the UDP traffic is still blocked. Option B is wrong because HTTPS on 443 affects encrypted web traffic, not name resolution, and the user can reach sites by IP. Option A is wrong because a down web server would block access by IP too. Option C is wrong because the user clearly has a working IP address (they can reach sites by IP).
Exam objective: 220-1201 Objective 2.1: Compare and contrast TCP and UDP ports, protocols, and their purposes
Q26.A user reads email on a phone, a laptop, and a tablet, and wants messages marked as read on one device to show as read on the others. Which protocol should the mail client use?
Explanation: IMAP keeps mail on the server and synchronizes state (read/unread, folders) across all devices, which is exactly what this user needs. Option B is wrong because POP3 downloads mail to one device and typically removes it from the server, so other devices cannot see the same mailbox state. Option A is wrong because SMTP sends mail; it does not retrieve or synchronize it. Option C is wrong because LDAP is a directory lookup protocol, not an email protocol.
Exam objective: 220-1201 Objective 2.1: Compare and contrast TCP and UDP ports, protocols, and their purposes
Q27.Why does a DNS lookup normally use UDP rather than TCP?
Explanation: DNS queries are small and fast, so UDP's connectionless, low-overhead delivery is ideal; if a response is lost, the client simply retries. Option C is wrong because neither UDP nor TCP is encrypted by itself. Option B is wrong because DNS does use TCP for large responses such as zone transfers. Option A is backwards: TCP guarantees delivery through acknowledgments and retransmission; UDP does not.
Exam objective: 220-1201 Objective 2.1: Compare and contrast TCP and UDP ports, protocols, and their purposes
Q28.A user's laptop connects to Wi-Fi in the office but the signal is very weak in a meeting room two floors away, even though the access point is new and supports Wi-Fi 6. Which change is most likely to improve coverage in that room?
Explanation: Lower frequencies travel farther and penetrate walls better, so 2.4 GHz gives better coverage at distance than 5 GHz (at the cost of lower speed). Option A is wrong because 6 GHz has the shortest range of all three bands. Option D is wrong because wider channels increase speed, not range, and reduce the number of available channels. Option B is wrong because MIMO improves throughput using multiple antennas; disabling it would make performance worse.
Exam objective: 220-1201 Objective 2.2: Explain wireless networking technologies
Q29.A user's computer has the IP address 169.254.14.88 and cannot reach the internet. Other computers on the same network work fine. What is the most likely cause?
Explanation: An address in the 169.254.0.0/16 range is an APIPA address, which Windows assigns automatically when no DHCP server responds. Since other computers work, the DHCP server is up — the problem is this host's path to it (cable, switch port, or DHCP client service). Option B is wrong because a DNS problem would not change the IP address. Option A is wrong because a wrong gateway would still leave a normal DHCP-assigned address. Option D is wrong because a VLAN problem would typically prevent an address from being assigned at all or give a different subnet, and APIPA specifically indicates DHCP failure.
Exam objective: 220-1201 Objective 2.6: Given a scenario, configure basic wired/wireless small office/home office (SOHO) networks
Q30.An administrator wants to separate guest Wi-Fi traffic from the company's internal servers so guests cannot reach the servers. Which technology provides this separation?
Explanation: A VLAN creates a logical network segment: devices in different VLANs cannot communicate without a router, so guest devices in one VLAN are isolated from servers in another. Option D is wrong because a VPN creates an encrypted tunnel for remote access; it does not segment a local network. Option A is wrong because a proxy forwards and filters web requests; it does not isolate network segments. Option B is wrong because a load balancer distributes traffic among servers; it provides no isolation.
Exam objective: 220-1201 Objective 2.4: Explain common network configuration concepts
Q31.A technician needs to install a wireless access point on a ceiling where there is no power outlet nearby. The switch in the wiring closet supports PoE. What is the best solution?
Explanation: PoE delivers power over the Ethernet cable, so the access point needs only its network cable — no nearby power outlet is required. Option D is wrong because running new electrical wiring is expensive and unnecessary when PoE is available. Option B is wrong because a USB adapter still needs a power outlet nearby. Option C is wrong because a wireless mesh link does not solve the power problem at all.
Exam objective: 220-1201 Objective 2.5: Compare and contrast common networking hardware devices
Q32.A technician has run a new Ethernet cable through a wall but does not know which port it terminates on at the patch panel. Which tool should be used to identify the correct port?
Explanation: A toner probe (tone generator and probe) sends an audible tone down the cable so the technician can find which patch panel port it terminates on by listening for the tone. Option C is wrong because a crimper attaches connectors to cable ends; it cannot trace a run. Option B is wrong because a loopback plug tests whether a port can send and receive; it does not identify which cable is which. Option A is wrong because a cable stripper only removes the outer jacket from a cable.
Exam objective: 220-1201 Objective 2.8: Explain networking tools and their purposes
Q33.A small business server needs storage that survives the failure of any single drive and provides good read performance, using three drives. Which RAID level should be used?
Explanation: RAID 5 stripes data with parity across three or more drives and survives any single drive failure, which matches the requirement with three drives. Option C is wrong because RAID 0 has no redundancy — one failure loses all data. Option B is wrong because RAID 1 uses exactly two mirrored drives (and with three drives it is not the standard configuration). Option D is wrong because RAID 10 requires a minimum of four drives.
Exam objective: 220-1201 Objective 3.4: Compare and contrast storage devices
Q34.A technician is upgrading a desktop that currently has one 8 GB DDR4 module. The user wants 16 GB running in dual-channel mode. What should the technician install?
Explanation: Dual-channel mode needs two matched modules in the correct paired (usually colour-matched) slots, so adding a second 8 GB DDR4 module of the same speed is the right upgrade. Option A is wrong because DDR3 is a different generation and will not fit a DDR4 slot. Option B is wrong because DDR5 does not fit a DDR4 board, and a single module would still run in single-channel mode. Option C is wrong because adding two 4 GB modules alongside the existing 8 GB gives 16 GB but with mismatched module sizes across the channels, not the matched pair dual-channel mode needs.
Exam objective: 220-1201 Objective 3.3: Compare and contrast RAM characteristics
Q35.A graphic designer needs a monitor with accurate colours and wide viewing angles for photo editing. Which panel type is the best choice?
Explanation: IPS panels are the standard choice for colour-critical work because they combine wide viewing angles with accurate, consistent colour. Option A is wrong because TN panels are fast but have poor viewing angles and washed-out colour. Option B is wrong because VA panels have good contrast but slower response and less colour accuracy than IPS. Option D is wrong because OLED is typically the most expensive option, not the cheapest (and it also carries burn-in risk for static images).
Exam objective: 220-1201 Objective 3.1: Compare and contrast display components and attributes
Q36.A technician is building a PC with a new Intel CPU. The motherboard box lists an AMD AM5 socket. What is the problem?
Explanation: CPU sockets are vendor- and generation-specific: an Intel CPU physically cannot fit in an AMD AM5 socket, and the electrical pin layout is different. Option D is wrong because the CPU cannot be installed at all. Option A is wrong because no BIOS update can change a physical socket. Option B is wrong because the problem is the CPU socket, not the RAM.
Exam objective: 220-1201 Objective 3.5: Given a scenario, install and configure motherboards, central processing units (CPUs), and add-on cards
Q37.A warehouse needs to print delivery notes on three-part carbon-copy paper. Which printer type should be used?
Explanation: Impact printers strike pins through an inked ribbon onto the paper, and the physical force transfers the image through all layers of a multipart form — no other printer type can do this. Option A is wrong because a laser printer fuses toner onto the top sheet only; it cannot mark the copies underneath. Option B is wrong because inkjet sprays ink onto the surface of the top sheet only. Option D is wrong because thermal printers use heat on special paper and cannot produce carbon copies.
Exam objective: 220-1201 Objective 3.8: Given a scenario, perform appropriate printer maintenance
Q38.A laser printer has printed 200,000 pages and now produces faded output with lines down the page, even with a new toner cartridge. What maintenance should be performed?
Explanation: At high page counts, laser printer wear items — the fuser, rollers, and separation pads — degrade and cause faded output and lines. The manufacturer's maintenance kit replaces them. Option C is wrong because printhead cleaning is an inkjet procedure; laser printers have no printheads. Option D is wrong because ribbons belong to impact printers. Option A is wrong because a driver change affects how jobs are rendered, not the physical quality of faded, lined output with a new toner cartridge.
Exam objective: 220-1201 Objective 3.8: Given a scenario, perform appropriate printer maintenance
Q39.A graphic design studio prints high-quality colour artwork and brochures. Which printer driver language is the best choice?
Explanation: PostScript was developed by Adobe for graphics and desktop publishing and renders complex artwork, fonts, and colour more precisely than PCL. Option A is wrong because PCL is designed for general office text printing, not graphics-heavy work. Option B is wrong because thermal is a printer type, not a driver language. Option D is wrong because ESC/P is an old Epson printer control language, not a modern graphics standard.
Exam objective: 220-1201 Objective 3.7: Given a scenario, deploy and configure multifunction devices/printers and settings
Q40.A user needs to scan a fragile, bound book. Which scanning method should be used?
Explanation: A flatbed scanner lets the user place the book on the glass and scan one page at a time without bending or feeding it — the only safe option for bound or fragile originals. Option B is wrong because an ADF feeds pages through rollers, which would damage a bound book and cannot handle pages that are not loose sheets. Option D is wrong because scan-to-email is a destination, not a scanning method. Option C is wrong because there is no such thing as a thermal scanner in this context.
Exam objective: 220-1201 Objective 3.7: Given a scenario, deploy and configure multifunction devices/printers and settings
Q41.A security analyst needs to examine a suspicious file without risking the company network. Which approach is safest?
Explanation: A sandboxed VM is isolated from the host and the network, so any malicious behaviour is contained in the VM, which can simply be deleted afterwards. Option B is wrong because running a suspicious file on a real workstation risks infecting it, even with antivirus. Option A is wrong because the file server is the worst place to run malware — it holds shared company data. Option D is wrong because it spreads the suspicious file to another person.
Exam objective: 220-1201 Objective 4.1: Explain virtualization concepts
Q42.What is the main difference between a virtual machine and a container?
Explanation: A VM includes a complete guest operating system running on virtualized hardware, while a container shares the host's kernel and packages only the application and its libraries — which is why containers start faster and use fewer resources. Option D states the relationship backwards. Option A is wrong because both VMs and containers can run on servers or desktops. Option C is wrong because it is the VM that needs a hypervisor; containers are managed by a container runtime.
Exam objective: 220-1201 Objective 4.1: Explain virtualization concepts
Q43.A developer rents a virtual server from a cloud provider, installs Linux on it, and runs a custom application. Which cloud service model is this?
Explanation: IaaS provides virtual machines, storage, and networking while the customer manages the OS and applications — renting a VM and installing Linux on it is the textbook example. Option C is wrong because SaaS means using a provider-run application, not installing your own OS. Option A is wrong because in PaaS the provider manages the OS and runtime; here the developer installed Linux themselves. Option B is wrong because community cloud is a deployment model (shared by organizations with common interests), not a service model.
Exam objective: 220-1201 Objective 4.2: Summarize cloud computing concepts
Q44.An online shop expects a large spike in traffic during a holiday sale and wants its web servers to scale up automatically, then scale back down when the sale ends. Which cloud characteristic makes this possible?
Explanation: Elasticity is the ability of cloud resources to scale up and down automatically with demand, which is exactly what the shop needs for a traffic spike. Option A is wrong because multitenancy means many customers share the same infrastructure; it does not scale resources. Option B is wrong because file synchronization keeps files consistent across devices. Option C is wrong because metered utilization is pay-per-use billing — it affects the cost of scaling, not the ability to scale.
Exam objective: 220-1201 Objective 4.2: Summarize cloud computing concepts
Q45.A desktop powers on — fans spin and lights come on — but the screen stays blank and the computer emits a series of beeps. What should the technician check first?
Explanation: POST beeps during startup are the BIOS reporting a hardware fault before the OS loads, and beep codes most commonly indicate RAM or video problems — reseating the RAM is the standard first step. Option C is wrong because the OS has not started loading yet; a blank screen with beeps is a pre-boot hardware issue. Option A is wrong because network connectivity has nothing to do with POST. Option B is wrong because printer drivers load with the OS, long after POST.
Exam objective: 220-1201 Objective 5.1: Given a scenario, troubleshoot motherboards, RAM, CPUs, and power
Q46.A user's hard drive has started making a repeated clicking sound, and files are taking much longer to open. What should the technician do first?
Explanation: Repeated clicking from a hard drive (the "click of death") means the read/write heads cannot find data — a sign of imminent mechanical failure. The priority is to back up the data before the drive dies completely. Option A is wrong because defragmenting a failing drive adds stress and wastes the remaining time. Option C is wrong because reinstalling the OS does not fix a mechanical fault and risks the data. Option B is wrong because a bad cable would cause the drive to disappear or show errors, not a rhythmic clicking sound.
Exam objective: 220-1201 Objective 5.2: Given a scenario, troubleshoot drive and RAID issues
Q47.A RAID 5 array shows a degraded status, and one drive bay has an amber LED. The array is still accessible. What should the technician do?
Explanation: A degraded RAID 5 array has lost its redundancy: it survives one failure, and one has already happened, so a second failure would destroy the data. The failed drive (identified by the amber LED) must be replaced and the array rebuilt. Option B is wrong because running degraded leaves the data unprotected. Option C is wrong because reformatting would destroy the data. Option A is wrong because the problem is a failed drive, not the controller.
Exam objective: 220-1201 Objective 5.2: Given a scenario, troubleshoot drive and RAID issues
Q48.A user's laptop shows "limited connectivity" on Wi-Fi. The laptop can see the network but cannot reach the internet or any local server. Other devices on the same network work fine. What is the most likely cause?
Explanation: "Limited connectivity" means the device has a wireless link but no working IP configuration — the classic cause is DHCP failure, leaving the host with a 169.254.x.x APIPA address. Option B is wrong because other devices work, so the access point is up. Option C is wrong because a disconnected antenna would prevent the laptop from seeing the network at all. Option A is wrong because an ISP outage would affect all devices, not just one laptop, and would not cause a "limited connectivity" warning.
Exam objective: 220-1201 Objective 5.5: Given a scenario, troubleshoot network issues
Q49.A laser printer outputs pages covered in random symbols and strange characters instead of the document. The printer worked correctly yesterday. What is the most likely cause?
Explanation: Garbled print — random characters instead of the document — is the classic symptom of a wrong or corrupted printer driver: the printer receives data it cannot interpret correctly. Option C is wrong because low toner causes faded output, not random characters. Option D is wrong because a failed fuser causes toner that smears or does not bond, not garbled text. Option B is wrong because an overfilled tray causes jams or misfeeds, not garbled output.
Exam objective: 220-1201 Objective 5.6: Given a scenario, troubleshoot printer issues
Q50.A printer keeps pulling several sheets of paper at once, causing frequent misfeeds. What is the most likely cause?
Explanation: Multipage misfeed happens when the separation mechanism fails to hold back extra sheets — worn separation pads are the usual cause — or when humid paper sticks together. Option D is wrong because low toner affects print quality, not paper feeding. Option C is wrong because the driver controls how jobs are rendered, not how the printer feeds paper. Option A is wrong because an overheating fuser causes toner and image problems, not misfeeds.
Exam objective: 220-1201 Objective 5.6: Given a scenario, troubleshoot printer issues